Shop Outboard Engines

Displacement

5559 cc

Gear Ratio

1.79:1

Alternator

90 A

Dry Weight

952 lbs

Shaft

0"

Steering

Remote

The Yamaha 400 HP XTO V8 is a 5.6-liter naturally aspirated four-stroke outboard engine designed for heavy offshore applications. It utilizes a direct fuel injection system to deliver fuel at high pressure into the combustion chambers, optimizing thermal efficiency. The engine features a 1.79:1 gear ratio and a high-output alternator providing 90 amps of total power. With a dry weight of approximately 952 lbs, this unit includes integrated electric steering and a power trim and tilt system. It is intended for multi-engine configurations on large center consoles and offshore cruisers. Compatibility is limited to vessels rated for 400 horsepower and equipped with digital electronic control systems.

Displacement

3441 cc

Gear Ratio

1.85:1

Alternator

133 A

Dry Weight

558 lbs

Shaft

25"

Steering

Remote

The Evinrude E-TEC 300 HP G2 is a V6 2-stroke outboard engine utilizing direct fuel injection technology. This unit features a 3.4 liter displacement and is equipped with integrated digital power steering and electronic throttle and shift controls. The engine operates with a 1.85:1 gear ratio and is designed for high-output marine applications requiring significant torque. This specific model includes a 25 inch shaft length and a high-output 133 amp alternator. The package includes a dual top-mount remote control, digital cabling, and a 4.3 inch Icon display. It is suitable for offshore vessels and large multi-engine configurations. Installation requires a standard BIA bolt pattern and compatible digital rigging components.

Displacement

4380 cc

Gear Ratio

1.75:1

Alternator

70 A

Dry Weight

620 lbs

Shaft

25"

Steering

Remote

Naturally aspirated 4.4L V8 powerhead engineered for offshore center consoles. Wide-band variable camshaft timing, dual overhead cams, and a counter-rotation compatible 1.75:1 lower unit deliver authoritative hole-shot under heavy load. Hydraulic steering compatibility and a 70 amp alternator support full-load offshore electronics.

Displacement

4166 cc

Gear Ratio

1.75:1

Alternator

70 A

Dry Weight

562 lbs

Shaft

25"

Steering

Remote

The Yamaha 300 HP V6 is a 4.2-liter four-stroke marine engine designed for high-displacement performance. This unit features a 24-valve DOHC V6 configuration with Electronic Fuel Injection (EFI) to manage fuel delivery across the 5000-6000 RPM operating range. The mechanical design utilizes a 1.75:1 gear ratio and a high-output 70-amp alternator to support onboard electronics and battery charging. Weighing approximately 562 lbs, the engine includes a standard Power Trim and Tilt system. This outboard is intended for use on medium to large offshore boats requiring a 25-inch transom height. Compatibility is limited to vessels rated for 300 horsepower using the standard BIA bolt pattern.

Displacement

4169 cc

Gear Ratio

1.75:1

Alternator

70 A

Dry Weight

562 lbs

Shaft

25"

Steering

Remote

The Yamaha F250 is a 4169cc V6 four-stroke outboard engine utilizing electronic fuel injection (EFI) for precise fuel delivery. This unit features a 25-inch extra long shaft and a 1.75:1 gear ratio. The engine is equipped with electric start, power trim and tilt, and drive-by-wire digital throttle and shift systems. Weighing approximately 562 lbs, this 2022 model includes the necessary remote control, cables, and digital gauge for installation. It is designed for offshore and large coastal vessels requiring high torque and consistent power output. Compatibility is limited to boats rated for 250 horsepower with a 25-inch transom height.

Displacement

4166 cc

Gear Ratio

1.75:1

Alternator

70 A

Dry Weight

571 lbs

Shaft

30"

Steering

Remote

The Yamaha F250 NCB is a 4166cc V6 four-stroke outboard engine engineered for large offshore vessels. This model features a 30-inch extra-long shaft and utilizes a Double Overhead Camshaft design with 24 valves for efficient combustion. The engine is equipped with digital controls and electric steering to provide precise handling. It includes a multi-point Electronic Fuel Injection system and a gear ratio of 1.75:1. The unit features a high-output 70-amp alternator to support onboard electronics and a power trim and tilt system for depth adjustment. This engine is intended for installation on transoms requiring a 30-inch shaft length and is compatible with standard BIA mounting patterns.

Displacement

3300 cc

Gear Ratio

1.86:1

Alternator

50 A

Dry Weight

487 lbs

Shaft

20"

Steering

Remote

3.3L 24-valve V6 calibrated for bay boats and dual-console hulls in the 20–24 ft class. Integrated digital throttle & shift, sealed wiring harness, and saltwater-grade anodic protection support all-day use in coastal environments. 50 amp alternator and EFI deliver consistent fuel economy.

Displacement

2785 cc

Gear Ratio

1.86:1

Alternator

50 A

Dry Weight

487 lbs

Shaft

20"

Steering

Remote

The Yamaha 200 HP outboard engine utilizes a 2.8-liter, 16-valve DOHC inline 4-cylinder architecture. This 4-stroke powerhead features Electronic Fuel Injection (EFI) and a 1.86:1 gear ratio to manage power delivery across a wide RPM range. The unit is equipped with a digital electronic control system, also known as Drive-by-Wire, which manages shifting and throttle response through electrical signals rather than mechanical cables. Weighing approximately 487 lbs, the engine includes a 50-amp alternator to support onboard electronics and a power trim and tilt system for hull leveling. This motor is designed for installation on center consoles, bay boats, and pontoon boats requiring a 20-inch transom height. Compatibility is based on standard BIA bolt patterns and NMEA 2000 networking protocols.

Displacement

3471 cc

Gear Ratio

1.86:1

Alternator

60 A

Dry Weight

600 lbs

Shaft

25"

Steering

Remote

The Honda BF200 is a 3471cc V6 four-stroke marine engine designed for offshore and large coastal vessels. This 2019 model utilizes programmed electronic fuel injection (EFI) to manage fuel delivery across its six-cylinder architecture. The engine features a 25-inch extra long shaft and a 1.86:1 gear ratio to optimize torque for heavy hull applications. Mechanical systems include electric starting and a power trim and tilt assembly. The unit comes equipped with a remote control box, wiring harnesses, and a comprehensive gauge suite including a tachometer and trim indicator. This outboard is suitable for repowering fiberglass or aluminum hulls requiring a 25-inch transom height and a 200-horsepower rating.

Displacement

2670 cc

Gear Ratio

2.00:1

Alternator

35 A

Dry Weight

480 lbs

Shaft

30"

Steering

Remote

The Mavimare GF 150 BRT is a heavy-duty hydraulic steering system engineered for outboard motors with a maximum rating of 150 HP. This mechanical assembly utilizes a high-pressure pump and cylinder constructed from marine-grade aluminum and 316 stainless steel. All included fasteners are A4 grade stainless steel to ensure resistance against corrosion in saltwater environments. The system is designed for engines with a 30 inch shaft length and provides precise directional control for vessels equipped with mid-to-high range outboard power. This unit is compatible with standard BIA mounting patterns and is intended for professional installation on recreational or commercial watercraft. Proper hydraulic fluid levels must be maintained for optimal operation.

Displacement

2670 cc

Gear Ratio

2.00:1

Alternator

35 A

Dry Weight

480 lbs

Shaft

20"

Steering

Remote

The Yamaha F150 LD is a 2670cc inline four-cylinder four-stroke marine engine designed for reliable offshore and inshore performance. This model features a Double Overhead Camshaft (DOHC) design with four valves per cylinder to optimize air intake and fuel efficiency. The engine utilizes Electronic Fuel Injection (EFI) for consistent starting and precise throttle response across various atmospheric conditions. Mechanical specifications include a 2.00:1 gear ratio and a high-output 35 amp alternator to maintain battery charge while supporting onboard electronics. This unit comes equipped with an integrated hydraulic steering cylinder, digital tachometer, and power trim and tilt functionality. It is intended for use on medium to large center consoles, dual consoles, and bay boats with a 20 inch transom height. Compatibility is based on standard BIA bolt patterns and 12V electrical systems.

Displacement

2670 cc

Gear Ratio

2.00:1

Alternator

35 A

Dry Weight

480 lbs

Shaft

20"

Steering

Remote

The Yamaha F150 EFI is a four-stroke outboard engine featuring a 2670cc inline four-cylinder configuration. This unit utilizes Electronic Fuel Injection (EFI) for precise fuel delivery and consistent starting across various environmental conditions. The mechanical design includes a 2.00:1 gear ratio and a dry weight of approximately 480 lbs. This specific model is configured with a 20-inch long shaft, electric start, and an integrated power trim and tilt system. The package includes the necessary remote control box, cables, and digital instrumentation. This engine is designed for medium to large recreational vessels requiring a long shaft installation. Compatibility should be verified against the vessel's maximum horsepower rating and transom height requirements.